blink® TotalCare System contact lens solution
Instructions for use / Package leaflet
The blink® TotalCare System an easy and convenient way to care for hard and rigid, gas permeable, transparent lenses.
The blink® TotalCare System is designed to help increase comfort and maximise lens wear time.
The blink® TotalCare System consists of the following components:
blink® TotalCare Daily cleaning products
blink® TotalCare Disinfection / storage / wetting solution
TotalCare lens case (non-sterile)
TotalCare protein removal tablets *
Daily care routine
Always wash and dry your hands thoroughly before handling contact lenses.
1. Remove the left lens from your eye and place it in the palm of your hand.
2. Place 2-3 drops blink® TotalCare every day on the lens surface and rub with your finger for 15-20 seconds. Never rub with a specific motion as this will not effectively clean the edges of the lens.
3. Each rinse of the lens blink® TotalCare rinse with a disinfectant, storage and wetting solution or sterile saline solution.
4. Place the lens in the holder of the smallest cap (L) to close the lens case.
5. Refill the lens case blink® TotalCare with disinfectant, storage and wetting solution. Make sure the lens case is completely filled to the top.
6. Repeat this procedure with the right contact lens.
1. Let the lenses sit for at least 6 hours blink® TotalCare soak in a disinfectant and wetting solution.
2. Rinse the lenses blink® TotalCare with disinfectant and wetting solution.
3. The lenses are ready to wear.
4. Discard the used solution, rinse the lens case blink® TotalCare disinfectant and wetting solution and leave to dry.
The lenses can be stored in the sealed case for up to 30 days.
If you store them for a longer period, disinfect them again before inserting them.
To moisten the contact lens, place 1-2 drops of blink® TotalCare disinfecting and wetting solution on the inner surface of each contact lens before inserting it.
During normal wear, protein from tears can build up on the contact lenses. This protein build-up can make the lenses uncomfortable and may reduce your vision.
The TotalCare intensive cleaning tablets / Ultrazyme Universale protein cleaning tablets are the best way to keep your lens clean and allow daily disinfection and removal of proteins in one easy step. You should also consult your eye doctor if you need to remove proteins.
After cleaning the lenses as described in the daily care routine, make a TotalCare or Ultrazyme Universal protein cleaner tablets in the case and fill it up blink® TotalCare with a disinfecting and wetting solution and then seal it.
Allow the lens to soak for at least 6 hours and up to 12 hours in the TotalCare or Ultrazyme Universal protein cleaner with tablet.
A TotalCare vagy Ultrazyme After using Universal Protein Cleaning Tablets, always rub and rinse lenses thoroughly before insertion blink® TotalCare with disinfectant and wetting solution.
Rinse the lens case blink® TotalCare with a disinfectant and wetting solution and leave to dry.
All destruction must be followed up. Failure to do so may cause serious eye infection or injury.
Do not use any of the above products if you are allergic to any of their contents.
Do not use tablets that are soft, sticky or irregular in appearance.
If eye irritation occurs, stop wearing lenses and contact your eye care professional.
Do not use if the seal is damaged or missing.
The blink® TotalCare not designed for use with soft contact lenses.
Always use a fresh solution.
Do not use after the expiry date.
Do not place the lens directly in the eye after the lens has been soaked TotalCare or Ultrazyme Universal protein cleaner in tablet.
Do not put the solution containing the protein tablet directly into your eyes. In such a case, remove the lens immediately and rinse the eye with water.
To avoid contamination, do not touch the tip of the bottle to any surface and avoid getting it in the eye.
Do not swallow the tablet or solution.
Do not rinse the lenses or case with tap water.
Recommended for blink® TotalCare use of a disinfectant and wetting solution for TotalCare with lens case.
The total blink® TotalCare System products store in a dry place.
Store at between 5°C and 25°C.
Close bottles tightly after use.
Keep out of reach of children.
45 days after the first opening of the bottle, discard the remaining blink® TotalCare disinfectant and wetting solution.
60 days after the first opening, discard the remaining blink® TotalCare Daily cleaning fluid.
blink® TotalCare disinfectant and wetting solution
Polyhexamethylene biguanide (PHMB) - 0,0005%
Disodium edetate - 0, 010%
blink® TotalCare Daily Cleaner Daily Cleaning Liquid
Polyhexamethylene Biguanide (PHMB) - 0, 0005%
Tyloxapol - 0.025%
Hydroxypropyl methyl cellulose - 0.15%
TotalCare /Ultrazyme Universal Intensive Protein Cleaner Tablets: (general disinfectant tablets):
Subtilisin A (0.4mg/tablet)
Note: It is possible that not all of the products listed above are included in this package, but are available separately if required. Please read the instructions for each product.
Bloch B, Liffey Valley, Office Campus
Quarryvale, Co. Dublin, Ireland
Blink, TotalCare and Ultrazyme are trademaks of Johnson & Johnson Surgical Vision, Inc.
Johnson & Johnson Surgical Vision, Inc. 2018